Hi guys,
I have a question regarding the measurement of wheels. Let's say I start my movement of 3 BW by performing a wheel of 1/2 BW (so let's assume it's 20mm). Can I now:
- Move 1/2BW and then another 2BW (so basically another 100mm) ?
- Move only another 2BW, since I have forfeited the 1st BW by wheeling (even not having wheeled the whole distance) ?
So basically the question is, if I wheel less than 1BW, do I get to use the rest of that BW for my subsequent movement or, since everything is measured in BW, I don't get to use fractions of that ?
Many Thanks,
Dan
PS: We've been playing this by using the whole movement, to the centimenter, but it occured to me that maybe the rule should be interpreted as only being able to use full BWs.
Distances are maximum movement distances. There is no requirement to move in whole base widths.
There is a restriction on a double wheel that an UG must move at least 1BW directly ahead between wheels. This is on the QRS.
Richard
Quote from: badhabum on November 06, 2022, 10:03:53 AM
By the way I think it has been discussed but cannot find it back
A TUG wheels up to it's max movement and drags a SUG . The SUG will move more than the TUG is it allowed if the SUG does not move more than it's max allowance ?
Page 104 - no UG can exceed its maximum movement distance in the terrain they are in. That includes the SuG being tugged.
Richard